Dan-List Model Up-Aks Frame Assembler
Dan-List Model Up-Aks frame assembler is an automatic, pneumatic floor model, which is operated by two hand release and a pneumatic foot pedal. Therefore, the Dan-List Model Up-Aks is absolutely safe to operate.
Standard equipment for the machine is:
- two stops for min. and max. wedge position
- single pressure pad for plain mouldings
- two double pressure pads for mouldings with different profiles
- frontal clamp device holding corners tightly together to create a perfect joint
- adjustable fences for all angles, e.g. for rectangular, hexagonal and octagonal frames
- built-in support for long mouldings
- two refillable solid-steel cartridges for 7 and 10 mm wedges, respectively
- one box of 7 mm wedges ( 5,000 pcs )
- one box of 10 mm wedges ( 3,000 pcs )
- air filter
- oil lubricator
- height-adjustable stand
- compressor
| Technical data for Dan-List Model Up-Aks Frame Assembler | |
| Wedge size | 5, 7, 10, 12 mm |
| Thickness of moulding, max. | 65 mm |
| Thickness of moulding, min. | 6 mm |
| Width of moulding, max. | 150 mm |
| Width of moulding, min. | 6 mm |
| Dist. between wedges, max. | 130 mm |
|
Machine dimension: Length x width x height |
575 x 330 x 490 mm |
| Stand
dimension: Height, max. Height, min. Width x length 2 shelves, width x length |
800 mm 570 mm 500 x 415 mm 150 x 320 mm |
|
Compressor 75/150: Voltage Output Capacity Air pressure, max. |
220/110 V 78 litre/min 15 litres 8 bar |
| Air pressure | 6 - 8 bar |
| Height, working bench | 272 mm |
| Weight | 95 kg |
Technical alterations without prior notice reserved