DANLIST ENDSCRIBER MACHINES
DANLIST - PME 100
For reversed profiling of cross-cut wood pieces
The workpieces are placed against the adjustable end stop and clamped pneumatically. The reversed cutting is done by moving the table manually from left to right and return to ensure a clean cut.
The DANLIST PME 100 can be delivered either as an endscriber only or it can be delivered with a cut-off unit that includes a digital read out and a Makita saw. This means that you can cut the piece into the correct size while doing the scribing.
To ensure maximum safety, a safety cover is protecting the operator from the two routers. The safety cover is equipped with a safety switch to ensure that the operator cannot activate the routers while the safety cover is open.
Dust free operation No compressor needed No noise Exact 45° degree cut