All Rights Reserved • Copyright©2019

webdesign by webandgraphicdesign.dk

  • Danlist on Facebook
  • Danlist on YouTube

+45 8643 5155

danlist@danlist.dk

DANLIST A/S

Haraldsvej 21
8960 Randers SE

Denmark

FOLLOW DANLIST

Monday - Thursday

8:00 a.m. - 4:30 p.m.

Friday

8:00 a.m. - 2:00 p.m.


Closed Saturday, Sunday and Public Holidays.

SPARE BLADES FOR MORSO NOTCH CUTTING MACHINES

MORSØ

Spare Side blades and nose knives 

MODELS: MORSØ NM, MORSØ NFS/NFL, MORSØ NFXS/NFXL, MORSØ NEH, MORSØ NXLEH, MORSØ ND

For the Morso notch cutting machines, we only supply blades of very high quality with a hardness of HR64. Therefore the blades have an extremely long life and does a lot of cuts in both soft wood, hard wood, MDF as well as plastic before needing to be resharpend

 

All Morso blade will last years - see The Anatomy of a Morso Blade.
 
Morso blades must be hollow ground to maintain the perfect clean cut.
 
For resharpening your blades, please contact your local supplier or send the blades to Dan-List.

Article 0705 for Morso Notch Cutting Machines.

​Long lasting side blades with a hardness of HR64

Nose knives for Morso NFL and NFXL notch cutting machines.

​Standard nose knives for Morso NFL and NFXL with a flat groove. Available from 12 mm to 26 mm / 1/2" to 1.125"

Please reload

Nose knives for Morso NFS and NFXS notch cutting machines.

​Standard nose knives for Morso NFS and Morso NFXS Cutting Machines with a V groove. Available from 6 to 20 mm / 1/4" to 3/4"

Special size nose knives available upon request.

​Special size nose knives for all Morso Notch Cutting Machines are available upon request. Starting from 4 mm up to 40 mm or more. / 1/8" up to 1 1/2" or more 

Please reload