SECOND-HAND MACHINES

Did you know, that your existing Dan-List machine is a valued asset and we are interested in trading your pre-loved machine for a newer model.


For pricing and detailed information, please contact us.

Technical alterations without prior notice reserved.

Apr 14, 2020

Morso EH Turbo

Automatic Electric Hydraulic 3/380 volt

* Automatic Electric / Hydraulic 3/380 volt

* Year of manufacture 1997 - refurbished 2020

* No dust - no dust extraction needed

* Dual hand operation ensuring 100% operator safety

* Very little noise

* Cutting cycle less than one second

Apr 14, 2020

Morso Model BAP Mitring Machine

Dust free pneumatic operated bench model

* Year of manufacture : 2013. Proto type.

* Pneumatic operated

* Dual hand release system ensuring 100 operator safety

* No dust - no dust extraction needed.

* Handy and compact bench top model

* Easy to move and load into the van

* Ideal for cutting glazing beads.

Apr 14, 2020

DANLIST Dowel Boring Machine Model BM 500

Manually operated dowel drilling machine

* Year of manufacture 1986. Fully renovated

* Flexible manually operated Dowel Boring Machine, ideal for the small production.

* For horizontal drillings, with an adjustable working table.

The Dan-List BM 500 contains the following:

  • 1 Dan-List boring unit for horizontal drillings,

  • 1 adjustable working table,

  • 1 pcs controller,

  • 1 pcs foot pedal for pneumatic clamping of workpiece and activating the drilling cycle.

Apr 14, 2020

Morso Model EH Digital Mitring Machine

Electric / hydraulic with touch screen

* Year of manufacture 2007 

* Serviced and renovated in 2020.

* Automatic electric hydraulic (no compressor needed) with touch screen operation

* Single phase 220 volt

* Blades newly sharpend.

* No dust - no dust extraction needed

* Dual hand operation ensuring maximum operator safety

* Further images available upon request

Apr 14, 2020

Morso Model F plus Ten Mitring Machine

With a 10 cm higher machine frame - good for taller operators

* Demo machine from tradeshows

* Year of manufacture 2019

* Manually operated by foot pedal

* No dust - no dust extraction needed

* No compressed air and no electricity needed to operate the machine

Apr 14, 2020

Morso EH Mitring Machine

Electric / hydraulic 3/380 volt

* Year of manufacture 1993 - refurbished 2020

* Electric / hydraulic - no compressor needed

* Dual hand operation ensuring maximum operator safety

* No dust - no dust extraction needed

* Further images available upon request.

Apr 14, 2020

Morso F chopper

Manually operated by foot

* Year of manufacture 1997 - refurbished 2020

* No compressor or electricity needed to operate the machine

* No dust - no dust extraction required

 

Apr 14, 2020

Morso B mitring machine

Manually operated bench model

* Manually operated bench model

* No compressed air or electricity needed to operate the machine

* Good and compact machine

* Easy to move, for example from van to van

* Ideal for glazing beads

Apr 14, 2020

Danlist AFP 2500 Dowel Drilling Machine

Automatic programmable with 99 different programs

* Year of manufacture : 2018.

* Used at tradeshows only.

* With one unit from top and one unit from the side

* Further images available upon request

Apr 14, 2020

Morso Model UP-H Frame Assembler

Manually hand operated bench model

* Year of manufacture : 2020

* Used at one trade show 

* Manually hand operated bench model for assembling photo frames.

* No compressor or electricity needed.

* Supplied complete, ready for use, including one box of 5 and 7 mm wedges.

Apr 14, 2020

Morso Model UP-M Frame Assembler

Bench model, manually operated by hydraulic foot pedal

* Renovated 2018

* Handy bench model - easy to move

* Manually operated by hydraulic foot pedal 

* No compressor or electricity needed.

* No noise

* Supplied complete, ready for use, including one box of 7 and 10 mm wedges.

Apr 14, 2020

Morso Model UP-ATH Frame Assembler

Bench model, pneumatic operated by dual hand release system

* Renovated 2018

* Handy bench model - easy to move

* Pneumatic operated by dual hand release system for maximum operator safety 

* In very good working condition.

* Supplied complete, ready for use, including one box of 7 and 10 mm wedges.

Apr 14, 2020

Corner Block Drilling Machine BASP 1200

Custom made solution for corner blocks

Automatic dowel drilling machine Model BASP 1200, for drilling of corner blocks.

2 drilling units from the top. 
1 drilling unit from the side.
Capacity approx. 800 work pieces per hour.

Further images and demo video available upon request

Apr 14, 2020

BMI Universal Panel Saw Type TPS 125 x 255

Tiltable, flexible and low cost

* Type TPS 125 x 255.

* Sliding mechanism : Tooth Belt.

* Tiltable : Yes.

* Year of manufacture : 2019.

* Demonstration model from 2019.

* Maximum panel size 125 cm x 255 cm.

Apr 14, 2020

Morso NM Notch Cutting Machine

Manually operated by foot

* Year of manufacture 2019.

* Used at trade shows only.

* Dust free - no dust extraction needed

* No compressed air or electricity needed to operate the machine.

* For Georgian style windows, beaded face frames etc

Apr 14, 2020

Morso NFS Notch Cutting Mmachine

Manually operated, dust free and noiseless.

* Demo machine from 2019

* Manually operated by foot pedal

* No compressor or electricity needed 

* No dust - no dust extraction needed

* No noise 

* Exact cut and unique quality of surface

* Maximum cutting width 70 mm

* For Georgian style windows, half cross joints, beaded face frames etc

Apr 14, 2020

Morso NFXS Notch Cutting Machine

Manually operated, dust free and noiseless

* Demo machine from 2019

* Manually operated by foot pedal

* No compressor or electricity needed 

* No dust - no dust extraction needed

* No noise 

* Exact cut and unique quality of surface

* Maximum cutting width 200 mm

* For Georgian style windows, half cross joints, beaded face frames etc

Please reload

DANLIST A/S

Haraldsvej 21
8960 Randers SE

Denmark

+45 8643 5155

danlist@danlist.dk

  • Danlist on Facebook
  • Danlist on YouTube

FOLLOW DANLIST

Monday - Thursday

8:00 a.m. - 4:30 p.m.

Friday

8:00 a.m. - 2:00 p.m.


Closed Saturday, Sunday and Public Holidays.

All Rights Reserved • Copyright©2019

webdesign by webandgraphicdesign.dk